Access Point ProSafe WNDAP350 Wireless-N from Netgear

Monday, November 23, 2009

The company announced Netgear ProSafe Wireless-N Dual-Band Access Point WNDAP350. As the producer, is the first full-featured dual-radio wireless access point designed for growing companies. With ProSafe WNDAP350 companies will be able to provide fully mobile workplace for their employees and at the same time receive a performance that is needed for applications with higher requirements for bandwidth, for example, Voice-over-IP (VoIP), videoconferencing and "cloud" application .

At the same time office workers can get access to any network application from any place in the office, using specially designed platform. The device is suitable for the deployment of a wireless network over a large area and supports point-to-point and point-to-multipoint bridging with the use of Wireless Distribution System (WDS). Can simultaneously operate in frequency bands 2.4 GHz and 5 GHz, the dual-radio access point provides increased speeds of up to 15 times and covering up to 10 times over wireless networks, 802.11a and 802.11g. When operating in 5 GHz band for data transmission is not affected by interference from network devices, 802.11b and 802.11g, which makes the access point is a good solution for maximum bandwidth wireless networks and support these bandwidth intensive applications like streaming video and VoIP. At the same time, the access point is backward compatible with earlier network devices 802.11a, 802.11b and 802.11g.

With full support for the standard protocol Simple Network Management Protocol (SNMP), it can be controlled with any software based on standard technologies, network management. In addition, for easy management and configuration of the device can be used ProSafe Control Center interface on your browser. Also, the access point WNDAP350 protects your wireless network using a set of security features, for example, WPA, WPA2, detection of suspicious access points with support for 802.1x and RADIUS.

Integrated technology 802.3af Power-over-Ethernet (PoE) reduces the number of cables and allows optimal place an access point. It is equipped with a metal casing and is certified as a plenum-rated, which allows you to place this device over the false ceilings and to prevent theft of the access point can use the lock Kensington, which is mounted in a special hole on her body. Pre-set internal antennas provide maximum performance 6dBi wireless network and does not require additional guidance. In addition, as an option supported by installation of an external antenna 2,4 GHz. At the point Netgear ProSafe WNDAP350 by a lifetime warranty.